NVIDIA just released their GRID 2.0 GPU technology. In earlier articles I already described vGPU and the impact of GPUs in the datacenters. With this new release NVIDIA bumped up the use cases and performance characteristics to drive adoption of GPU within VDI and SBC implementations.

With GRID 2.0 the new Maxwell processor architecture for the NVIDIA GRID cards is introduced, while the former Keppler based K1/K2 could deliver a great user experience the new Maxwell’s will set the bar for user density without doing concessions on user performance.

How does vGPU work in one single image:

Source: NVIDIA Website

As an FYI: I recently learned that the K in K1/K2 stands for Keppler. The introduction of Maxwell leads to the M in M60/6 which are the newly introduced cards.

The benefits of GRID 2.0:

• Doubled user density: NVIDIA GRID 2.0 will allow you to push the newly introduced cards up to 128 users per server.
• Doubled application performance: Using the new Maxwell GPU architecture, GRID 2.0 will deliver twice the performance of before.
• Blade server support: Enterprises can now run GRID-enabled virtual desktops on blade servers.
• Linux support: Both Citrix and VMware now supports Linux so it makes sense to introduce Linux support for GRID 2.0 too. Enabling GPU powered desktops in a Linux based VDI environment.

Coming down to hard numbers and facts the M60 and M6 will add the following capabilities to your EUC deployments:

Compared to it’s predecessors the newer M60 and M6 will deliver a lot more CUDA Cores and are able to provide more power in general to enhance your EUC implementations. Hopefully this will drive vGPU adoption even more in the next following months.

The following two tabs change content below.

• Bio
• Latest Posts

Kees Baggerman

Kees Baggerman is a Staff Solutions Architect for End User Computing at Nutanix. Kees has driven numerous Microsoft and Citrix, and RES infrastructures functional/technical designs, migrations, implementations engagements over the years.

Latest posts by Kees Baggerman (see all)

• Nutanix AHV and Citrix MCS: Adding a persistent disk via Powershell – v2 - November 19, 2019
• Recovering a Protection Domain snapshot to a VM - September 13, 2019
• Checking power settings on VMs using powershell - September 11, 2019
• Updated: VM Reporting Script for Nutanix with Powershell - July 3, 2019
• Updated (again!): VM Reporting Script for Nutanix AHV/vSphere with Powershell - June 17, 2019