Comments on: Creating a Load Balanced Citrix StoreFront 2.5 Server Group with Citrix NetScaler 10.5

By: Amar Honnungar

Amar Honnungar — Fri, 10 Jun 2016 16:08:15 +0000

Ensure that the ROOT cert and Intermediate Cert used for binding on Netscaler vServer i.e., End Entity Certificate -> intermediate 2 -> intermediate 1 ( cross sign certificate ) -> sha-1 root or sha-2 root are all installed on the storefront cert store (MMC- Certificate snapin- Trusted and intermediate store (Add respective files here)). This was missed out on my storefront servers. Its still intriguing why https://msdn.microsoft.com/en-us/library/ms995347.aspx root and intermediate certs were not available on Storefront servers which should be pushed in the form of patching.

By: 2014 recap, here comes 2015! • My Virtual Vision

2014 recap, here comes 2015! • My Virtual Vision — Wed, 31 Dec 2014 12:28:39 +0000

[…] Creating a Load Balanced Citrix StoreFront 2.5 Server Group with Citrix NetScaler 10.5 […]

By: Ricardo Siqueira

Ricardo Siqueira — Wed, 17 Dec 2014 14:40:51 +0000

In reply to cory. HI cory you managed to solve this problem???

By: Jorge Aguirre

Jorge Aguirre — Fri, 29 Aug 2014 14:02:04 +0000

In reply to k.baggerman. I did it to.. the only thing that I didnt do was use https instead of http

By: k.baggerman

k.baggerman — Fri, 29 Aug 2014 06:41:54 +0000

In reply to Jorge Aguirre.

I’ve done similar deployments, maybe you should check your persistency on the lb VIP as Ingmar states in his previous comments:

– Persistence is better set to ‘SOURCEIP’ when used behing a Access Gateway to avoid “Cannot complete your request” – see solution 5 in http://support.citrix.com/article/CTX133904

By: Jorge Aguirre

Jorge Aguirre — Thu, 28 Aug 2014 14:39:27 +0000

Hi this is my scenerario:

I have 2 NS vpx in LB on a DMZ, also I have 2 SF on the servers LAN, I did step by step but I always have the same issue on the event viewer (error 3003) http://support.citrix.com/article/CTX133904

but any of those solutions help my on my deplyment.

just a question,
the load balancing VIP need to be on the same network as the backend storefornt servers?,

now I have these configuration
SF1(10.0.0.1)-servers network
SF2(10.0.0.2)-servers network

LBSF(10.1.0.1)-DMZ network

the ports that I open it was:
80
443
icmp

also I have a DNS record to give the LBSF a name that can be resolve by my to NS.

please can you help me.. I at this close to change SF for WI…

By: k.baggerman

k.baggerman — Sat, 16 Aug 2014 10:16:54 +0000

Hi Cory, did you see this post? http://discussions.citrix.com/topic/300714-passing-credentials-to-storefront-from-internal-portal-web-site/ Looks very similar to what you’ve been seeing.

By: cory

cory — Fri, 15 Aug 2014 01:55:39 +0000

I am running Storefront 2.5.2 and NetScaler 10.5 and have an issue. I am trying to integrate the published applications thru the gateway portal. I have several published bookmarks that I do not want to host on XenApp but want them to be obsurced when external.
I have noticed that the applications section of the Gateway Portal says “This content cannot be displayed in a frame”. How do I get this section to populate with applications?

By: Ingmar Verheij

Ingmar Verheij — Wed, 06 Aug 2014 09:13:53 +0000

Hi Kees,

Thank you for the video’s explaining how to load balance StoreFront using a NetScaler. I do have two small remarks:
– Persistence is better set to ‘SOURCEIP’ when used behing a Access Gateway to avoid “Cannot complete your request” – see solution 5 in http://support.citrix.com/article/CTX133904
– In the Storefront monitor there’s no need to specify the destination IP. If you keep it empty it will use the IP of the server and 1 generic monitor can be used (instead of 1 per server). Also keep in mind that in the “Special Parameters” the name of the store is specified. When a different store then “Store” is used you should change this.

Cheers
Ingmar

By: Virtual DMZ with Multi-WAN for NetScaler AAGEE Multi-Tenant (above your pay grade) | Cloud Solutions Architect

Fri, 18 Jul 2014 00:28:45 +0000

[…] http://blog.myvirtualvision.com/2014/07/14/creating-load-balanced-citrix-storefront-2-5-server-group… […]